If You

• Use PRODOK Basic Engineering,
• use CONVAL as calculation program for components,
• want to avoid multiple inputs of process and device data,
• want to increase the efficiency of your data,
• want to avoid errors caused by multiple inputs,

 

... You Need The PRODOK - CONVAL - INTERFACE

Hand over your data from the I&C-CAE-System PRODOK to the calculation program CONVAL. The results will be returned to PRODOK. The data used for the calculation and the calculated values are saved with the device.

 

The interface automates the workflow and guarantees a correct data exchange. As a result, the expenditure for multiple data input and the resulting input errors are avoided.

Calculation Types

 

The interface provides the

following computation types:

 

• Control Valves
   
• Restriction Orifice plates
   
• Differential Pressure flow elements

 

All parameters needed for

a calculation cen be viewed

at a glance.

Differences between the data

in PRODOK and CONVAL are

displayed in different colors.

Flexible And Easy Configuration

 

The field assignment for

the bidirectional data

communication between

PRODOK and CONVAL can be

configured easily in PRODOK.

 

All available data can be

exchanged between the

applications. The field

assignments for the default

calculation types are provided

with the interface.

Cope With Units

 

A big advantage of the assignment

of PRODOK-Units to CONVAL-UNITS

is, that there is no need to

adapt the units in a project.

 

To ensure a correct conversion

and assignment of the units

between PRODOK and CONVAL, a

conversion factor and an offset

value is provided.

 

Additionally, when handling

pressure values, you can specify

if you want to compute with

effective - or absolute values.

Hence, different values and units

can be used in each application.

. . . CADtech Consultants (P) Limited . New Delhi . Mumbai . Chennai . . .